Sleeveless Zip-Up Hoodie with Extended Shoulders and Split Front Pockets

Ningbo Haishu Dongbang Garment Co., Ltd. in China offers Sleeveless Zip-Up Hoodie with Extended Shoulders and Split Front Pockets as a broad outer layer. The shoulder fabric extends beyond the upper arm, while deep armholes reveal the long-sleeve garment worn underneath.

Images illustrate the reference style. The specifications describe a proposed production version and can be adjusted during development.

Design Structure

The Sleeveless Zip-Up Hoodie with Extended Shoulders and Split Front Pockets gains its width from the shoulder extension, not from a conventional sleeve. A deep armhole opens below that edge, making the relationship with an underlayer central to the design.

Inset stay stitching supports the lightly raw armhole edges in the proposed version. The opening needs to clear the underlayer without projecting too far from the side body. Review it with the intended sleeve thickness on the fit sample.

A Long Zip Through the Front

The Sleeveless Zip-Up Hoodie with Extended Shoulders and Split Front Pockets uses 80% cotton, 20% polyester brushed-back fleece at 330 GSM. A two-way front zip is selected so the lower opening can be adjusted while the upper body remains fastened.

The split pockets sit on either side of the zip. Their edges and the lower band give the otherwise plain front a clear structure, while vertical back seams divide the rear body.

Layering Clearance

The hood uses matching fabric and a drawcord. A shorter shoulder extension is a development option if the intended underlayer is narrow, but reducing armhole depth at the same time could limit clearance. Adjust one fit sample with both garments worn together.

Suggested Development Specifications

Development Size Guide (cm)

Suggested garment measurements. Values labelled 1/2 arelaid-flat half widths, not full circumferences.

Body length: high shoulder point to hem, excluding hood or collar. Chest: half width at underarm level, laid flat without stretching. Hem: half width across the lower edge, laid flat.

Pattern Support for Layered Garments

Dongbang has four pattern staff and six sample-room staff for garment development. For a sleeveless outer layer, their review can focus on the shoulder extension, armhole shape and clearance over the intended inner sleeve.

Fit comments can be translated into targeted pattern changes, then checked on a revised sample. New materials or larger construction changes are reviewed before a revised schedule is confirmed.

Our Certificates

FAQ

1. Is the long-sleeve top included?

No. It is a separate styling layer. This SKU describes the sleeveless zip hoodie with extended shoulders.

2. Why specify a two-way zip?

Opening the lower slider can give more room around the hem while the upper front stays closed. Its length and operation should be checked on the sample.

3. Can the armhole edge be fully bound?

Binding is a development option for a cleaner edge. It will change the lightly raw appearance and add some thickness around the opening.

4. How long does sample development take?

Usually 7–15 working days after design details, measurements and materials are confirmed. Revisions follow your comments. Minor changes are generally faster; major changes or new fabrics and trims can need additional time. Revised timing is confirmed after review.

5. Can the pattern and size range be customized?

Yes. We can create a pattern or modify an existing one from your tech pack, size chart, reference garment or design requirements. Measurements and fit are adjusted through sampling before bulk production.

Sample It over the Intended Inner Layer

Provide an underlayer reference and the preferred shoulder extension for the Sleeveless Zip-Up Hoodie with Extended Shoulders and Split Front Pockets (DB0040). Include body length and lower-zip opening requirements so the fit can be assessed together.