White Oversized Crew Neck T-Shirt with Gathered Waist and Round Ornament

At Ningbo Haishu Dongbang Garment Co., Ltd. in China, the White Oversized Crew Neck T-Shirt with Gathered Waist and Round Ornament draws cloth into one front-waist gather. The broad shoulders and loose sleeves retain their volume around this single anchor point.

Images illustrate the reference style. The specifications describe a proposed production version and can be adjusted during development.

Design Concept

The White Oversized Crew Neck T-Shirt with Gathered Waist and Round Ornament starts with the room of an oversized T-shirt, then redirects part of that cloth into a single gather. Folds travel toward the warm gold/brown-toned ornament while the shoulders, sleeves and opposite side remain loose.

The ornament and gathering belong to the garment design. Their position controls the result: moving the anchor toward the side draws the folds sideways, while raising it changes the amount of loose cloth below. This is a localized shaping detail rather than an elasticated waist.

Jersey, Gathering and Attachment

The base uses 95% cotton, 5% elastane single jersey at 220 GSM, with a crew-neck band and coverstitched hems. The cloth is finished before cutting. A35 mm round resin ornament has a solid metallic-look face and a concealed rear loop. The front gathering is secured behind it with hidden stitches; the selected back is plain.

For the White Oversized Crew Neck T-Shirt with Gathered Waist and Round Ornament, the important sample checks are the amount of cloth secured behind the ornament, how the folds hang, and the strain at the securing stitches. Check the ornament edges and rear attachment area so the ornament holds the gather without cutting into the cloth.

Loose Sleeves, Simple Neckline

Dropped shoulders and elbow-length sleeves keep volume above and beside the gather. The round neckline remains undecorated, leaving the waist detail as the only strong accent on the white body.

An alternative ornament finish can change the contrast without changing the main pattern. Sample the actual component for its surface and edges before use. Reducing the body width is a separate fit option because it leaves less fabric available for the front folds.

Suggested Development Specifications

Development Size Guide (cm)

Suggested garment measurements. Values labelled 1/2 arelaid-flat half widths, not full circumferences.

Body length: high shoulder point to hem on the ungathered side. Sleeve: dropped shoulder seam to sleeve edge. Chest: laid-flat half width at underarm level, above the gather; measure without stretching.

Care Guide

Washing

Follow the care instructions confirmed for the finished White Oversized Crew Neck T-Shirt with Gathered Waist and Round Ornament. The garment should be handled carefully around the front-waist gathering and attached resin ornament during washing.

Ornament Protection

Pay particular attention to the 35 mm round resin ornament and its concealed rear loop. Avoid excessive pulling or pressure on the ornament and the hidden stitches securing the gathered fabric.

Drying and Storage

After washing, maintain the original garment shape around the gathered waist and allow the fabric to settle naturally. Store the T-shirt without placing unnecessary pressure on the ornament or front gathering.

Why Choose Us

Dongbang maintains established production and compliance practices for apparel manufacturing, supported by recognized certifications and quality management procedures.

Certified Production

Dongbang holds amfori BSCI, GRS and GSV certifications, covering social compliance, recycled-material requirements and supply-chain security.

Quality Process

Production includes incoming material checks, first-piece approval, in-process inspection and finished-garment inspection. Finished garments receive 100% visual inspection in principle.

Experienced Manufacturing

With garment manufacturing experience dating back to 2003, Dongbang supports different apparel categories and production requirements from development through bulk production.

Our Certificates

FAQ

1. Is the round ornament supplied as part of the top?

It is included in the intended garment design, together with the front gathering. The base specifies a round resin ornament with a solid face, concealed rear loop and securing stitches. Confirm the component and attachment on the development sample.

2. Will this oversized T-shirt be gathered at the back too?

The selected version has a plain back and a localized front gather. A back gather would be a different construction option and would need its own fit review.

3. Can the gather be moved higher or lower?

Yes. For the White Oversized Crew Neck T-Shirt with Gathered Waist and Round Ornament, the preferred anchor position can be marked on the front pattern or a reference image. The new fold direction, body coverage and ornament attachment should be reviewed on a sample before confirmation.

4. How do you control garment quality?

Our 16 QC staff conduct production checks, with 100% visual inspection in principle for finished garments.

5. What is the bulk production lead time?

Orders up to 10,000 pieces usually take 15–30 days. Around 100,000 pieces can typically be completed in about 30 days.