Grey Stand Collar Zip Jacket with Smooth Shoulder and Chest Panels

The Grey Stand Collar Zip Jacket with Smooth Shoulder and Chest Panels is from Ningbo Haishu Dongbang Garment Co., Ltd. in China. Smooth pale-grey fabric outlines the shoulders and chest pocket, giving the textured grey fleece a deliberate change of surface near the top.

Images illustrate the reference style. The specifications describe a proposed production version and can be adjusted during development.

Fabric Selection

The Grey Stand Collar Zip Jacket with Smooth Shoulder and Chest Panels places smooth fabric where the eye first meets the shoulder line and chest pocket. The larger body and sleeves retain a mottled sweater-fleece surface, so the panels remain distinct even within a close grey palette.

The main fabric is 100% polyester sweater fleece at 300 GSM. The selected overlays are 100% polyester plain weave at 110 GSM. They provide surface contrast; no specific abrasion rating is assigned to them.

Matching the Panel Edges

On the Grey Stand Collar Zip Jacket with Smooth Shoulder and Chest Panels, a lighter woven panel meets a more substantial knit body. The sampling review should compare their dimensional change and check that the joined edges stay flat.

The chest zip needs local support inside the smooth panel. Too much stiffness could pull the panel away from the torso, while insufficient support can leave waviness around the opening.

A Straight Layer with Clear Contrast

The collar stands above the zip, and the self-fabric cuffs and hem remain open. Side welt pockets sit below the smooth upper panels, leaving the main contrast near the chest and shoulders.

 

A darker overlay is an alternative color direction. Review it on both front and back, because stronger contrast will make the yoke line more prominent.

Suggested Development Specifications

Development Size Guide (cm)

Suggested garment measurements. Values labelled 1/2 arelaid-flat half widths, not full circumferences.

Body length: high shoulder point to hem, excluding hood or collar. Chest: half width at underarm level, laid flat without stretching. Sleeve length: shoulder seam to sleeve edge; measured from the dropped seam where applicable.

Quality Review at the Fabric Joins

Dongbang’s 16 QC staff support checks from incoming materials through finished garments. For this jacket, the useful points include smooth-panel shade, pocket-zip flatness and the seam joining woven overlays to the knit body.

A pre-production sample can establish the approved panel shape and workmanship. In-line checks can then identify edge distortion before the complete order reaches final inspection.

Our Certificates

FAQ

1. What creates the lighter panel effect?

The base uses smooth pale-grey woven overlays against a mottled sweater-fleece body. Both color and surface change at the panel edges.

2. Are the cuffs gathered with rib?

No. The selected jacket has open self-fabric cuffs, preserving the straight sleeve line.

3. Can the chest panel be removed while keeping the pocket?

That is a separate construction option. The pocket opening would need a new support method on the fleece and a revised sample.

4. How long does sample development take?

Usually 7–15 working days after design details, measurements and materials are confirmed. Revisions follow your comments. Minor changes are generally faster; major changes or new fabrics and trims can need additional time. Revised timing is confirmed after review.

5. How is production quality controlled?

Checks cover incoming materials, first-piece approval, in-line workmanship and finished garments. Measurements are sampled across colors, sizes and batches. Defects are separated, repaired and re-inspected; any required product testing is agreed for the order.

Approve the Two Grey Surfaces

Send main-fleece and smooth-panel references for the Grey Stand Collar Zip Jacket with Smooth Shoulder and Chest Panels (DB0054). Include chest-pocket dimensions and the preferred contrast level across the rear yoke.