Black Stand Collar Outdoor Hardshell Jacket with Contrast Sleeve Stripe

Black Stand Collar Outdoor Hardshell Jacket with Contrast Sleeve Stripe from Ningbo Haishu Dongbang Garment Co., Ltd. in China uses small markings and an orange upper-sleeve stripe to punctuate the black surface. Zipped storage and cuff adjustment give the design its practical focus.

Images illustrate the reference style. The specifications describe a proposed production version and can be adjusted during development.

Production Process

The Black Stand Collar Outdoor Hardshell Jacket with Contrast Sleeve Stripe needs its pocket and seam route established before final assembly. The proposed shell is a200 GSM three-layer laminate with a polyester woven face, polyurethane membrane and light polyester tricot back.

The first trial should join the selected fabric with a compatible seam tape. Pocket junctions, zip guards and places where several seams meet need particular review, because these areas add layers and can restrict access during sealing.

A Plain Collar with Adjustable Wrists

The Black Stand Collar Outdoor Hardshell Jacket with Contrast Sleeve Stripe has a stand collar and a full front zip with an inner guard. Two lower side zip pockets sit below the chest opening, distributing storage across the front.

The cuff tabs and elastic sections allow the wrist opening to be reviewed at different settings. A close setting should still leave enough room for the intended inner sleeve.

Confirming the Protection Target

The hardshell construction is proposed for development. Its materials, seams and complete zip assemblies need an agreed testing plan before any protective performance is claimed. A coated-looking zip is not proof of a watertight garment.

 

The orange sleeve stripe can be developed in another color. Its attachment route should be included in the shell trial so decoration does not become an unreviewed interruption to the construction.

Suggested Development Specifications

Development Size Guide (cm)

Suggested garment measurements. Values labelled 1/2 arelaid-flat half widths, not full circumferences.

Body length: high shoulder point to hem, excluding hood or collar. Chest: half width at underarm level, laid flat without stretching. Sleeve length: shoulder seam to sleeve edge; measured from the dropped seam where applicable.

From Material Trial to Garment Inspection

Dongbang can coordinate fabric sourcing, sampling and third-party inspection or testing to the project requirements. The specialist sealing route and its compatibility with the selected shell must be confirmed as part of development.

Once the garment reference is approved, production checks can cover pocket placement, zip operation, cuff adjustment and visible workmanship. Test scope and reporting needs are agreed separately for the order.

Our Certificates

FAQ

1. Why review pocket construction before assembly?

Pocket layers and seam intersections can make the sealing route harder to reach. The trial needs to establish that sequence before the lining or surrounding panels restrict access.

2. Can the cuff opening suit a thicker inner sleeve?

Yes. Provide the intended inner layer and wrist clearance. Review the tab range and elastic section on the fit sample.

3. Does a coated zip establish waterproof performance?

No. The complete zip assembly and its connection to the shell need review and testing against the agreed garment requirement.

4. How long does sample development take?

Usually 7–15 working days after design details, measurements and materials are confirmed. Revisions follow your comments. Minor changes are generally faster; major changes or new fabrics and trims can need additional time. Revised timing is confirmed after review.

5. Can we arrange independent inspection or testing?

Yes. Third-party inspections and product testing can be arranged to your requirements. Confirm the test scope, inspection standards and reporting needs before production or shipment so we can coordinate documents and on-site work.

Confirm the Construction and Test Scope

Send the protection target, pocket dimensions and cuff requirements for the Black Stand Collar Outdoor Hardshell Jacket with Contrast Sleeve Stripe (DB0056). Include the intended underlayer so the fit sample and material trial address the same use.