Black Full-Zip Track Jacket with Shoulder and Back Panels

Ningbo Haishu Dongbang Garment Co., Ltd., a supplier, develops the Black Full-Zip Track Jacket with Shoulder and Back Panels around a plain black outline. The shoulder sections continue the upper-body structure toward the back, where the yoke seam becomes the main visible line.

Images illustrate the reference style. The specifications describe a proposed production version and can be adjusted during development.

Design Structure

The Black Full-Zip Track Jacket with Shoulder and Back Panels keeps its panel detail close to the shoulders. A back yoke runs across the upper body, while the remaining rear panel stays plain. This leaves a clear area for a small mark if one is needed later.

A jacket with this restrained layout can work in a coordinated casual range without depending on a large graphic. The collar stands above the front zip, and the lower band defines the hem without a drawcord.

Compact Knit and Clean Openings

The Black Full-Zip Track Jacket with Shoulder and Back Panels is specified in 100% polyester compact double-knit tricot at 280 GSM. It provides a smooth fabric direction for the straight body and a consistent surface around the panel joins.

Side welt pockets are included in the development configuration. Keep their openings flat against the torso, with local support that does not create a stiff patch on the surrounding knit.

Small Details That Set the Fit

Polyester/elastane rib holds the cuffs and hem. A contrast zip or shoulder panel can be sampled for this jacket if more visible construction lines are wanted.

Suggested Development Specifications

Development Size Guide (cm)

Suggested garment measurements. Values labelled 1/2 arelaid-flat half widths, not full circumferences.

Body length: high shoulder point to hem, excluding hood or collar. Chest: half width at underarm level, laid flat without stretching. Sleeve length: shoulder seam to sleeve edge; measured from the dropped seam where applicable.

First-Piece Checks for a Plain Jacket

A plain black garment makes uneven seams and waviness easier to see. Dongbang’s incoming, first-piece, in-line and finished-garment checks can focus on zip flatness, paired shoulder seams, pocket openings and band attachment for this style.

The agreed sample and measurement sheet give the sewing and inspection stages a common reference. Any product-specific testing can be arranged to the order requirements.

Our Certificates

FAQ

1. Does the panel design continue around the back?

Yes. The shoulder detail connects visually with the upper back yoke. The large lower-back area remains plain.

2. Can the collar be made lower?

A lower stand collar is a development option. Revise its height together with the zip length and top guard so the opening remains tidy.

3. Can a chest logo be added?

A small print or embroidery can be sampled. Keep it clear of the zip and shoulder seams, and review local support on the selected knit.

4. How long does sample development take?

Usually 7–15 working days after design details, measurements and materials are confirmed. Revisions follow your comments. Minor changes are generally faster; major changes or new fabrics and trims can need additional time. Revised timing is confirmed after review.

5. How is production quality controlled?

Checks cover incoming materials, first-piece approval, in-line workmanship and finished garments. Measurements are sampled across colors, sizes and batches. Defects are separated, repaired and re-inspected; any required product testing is agreed for the order.

Choose the Panel Emphasis

For the Black Full-Zip Track Jacket with Shoulder and Back Panels (DB0042), send the black fabric reference, collar height and band widths. If contrast panels or a small logo are wanted, mark them on a front and rear layout.