Pullover Hoodie with Raised Tonal Chest Graphic and Truck Back Graphic

Ningbo Haishu Dongbang Garment Co., Ltd. in China makes the Pullover Hoodie with Raised Tonal Chest Graphic and Truck Back Graphic with two distinct graphic treatments. Raised tonal detail sits on the chest, while a much lighter truck image gives the back a stronger contrast.

Images illustrate the reference style. The specifications describe a proposed production version and can be adjusted during development.

Decoration Comparison

The Pullover Hoodie with Raised Tonal Chest Graphic and Truck Back Graphic uses the front and back for different effects. The chest graphic is close to the black ground and depends on surface relief; the truck graphic depends on white lines standing clearly against dark fleece.

High-build silicone is the proposed route for developing the raised motif. It gives a smoother relief than the textile-textured reference, so the intended surface should be approved through a decoration trial.

For this graphic pullover hoodie, the two routes need separate sample checks. A flat chest print would not reproduce the intended raised surface, while a thick raised back print would change the feel and character of the truck artwork.

Hood Contrast and Back Artwork Clearance

The grey inner hood is visible at the neck and when the hood lies on the upper back. Grey cotton drawcords continue that contrast through metal-tipped ends. The rest of the front stays plain below the chest graphic, without a pouch pocket.

 

Part of the upper back is covered when the hood is down. Place the essential truck detail below that area, then assess both hood-up and hood-down views before approving a revised layout. The reference artwork does not need to be stretched to fill the whole available panel.

Fleece and Print Development

The Pullover Hoodie with Raised Tonal Chest Graphic and Truck Back Graphic uses 80% cotton, 20% polyester brushed-back fleece at 340 GSM, with a100% cotton jersey hood lining at 160 GSM. Rib cuffs and the lower band contain the long sleeves and straight torso.

The selected fabric provides a substantial casual hoodie direction. The decoration still needs to be sampled on that actual fleece: raised-print adhesion, white coverage and behavior after laundering are separate checks from garment fit.

On a revised graphic pullover hoodie, changing the lining color can be a small adjustment with a clear visual effect. A brighter lining would attract more attention around the face and upper back; a black lining would bring the design closer to an all-black front.

Suggested Development Specifications

Development Size Guide (cm)

Suggested garment measurements. Values labelled 1/2 arelaid-flat half widths, not full circumferences.

Body length: high shoulder point to hem, excluding neck trim. Sleeve length: shoulder seam to sleeve edge along the outer sleeve. Chest: laid-flat half width at underarm level; measure without stretching.

Coordinating Two Decoration Processes

Dongbang offers printing and embroidery options selected to suit the artwork and fabric, with specialist processes arranged through partner suppliers where required. Here, separate chest and back trials can be brought together on one garment sample.

The pre-production sample confirms the print treatment alongside hood lining, drawcords, fit and rib details. Production checks can then compare the complete garment with that approved reference, rather than assessing each decoration in isolation.

Our Certificates

FAQ

1. Why are different print routes used on the chest and back?

The chest needs raised tonal relief, while the white truck artwork needs clear flat coverage. Separate routes allow those two effects to be sampled on the same fleece.

2. Does this version include a kangaroo pocket?

No. The selected front remains plain below the raised chest design. Adding a pocket would be a separate construction option.

3. Can the back artwork extend higher?

It can be reviewed, but the hood covers part of the upper back when lowered. Check that the main truck details remain readable in that position.

4. How is the bulk production schedule confirmed?

Timing is confirmed for the order after the product details are reviewed and the pre-production sample is approved. Quantity, workmanship, fabric and trim readiness, and the production schedule all affect the delivery plan.

5. Will we approve a sample before bulk production?

Yes. The project may use development, fit, size-set and other samples as required. The pre-production sample must be approved before bulk production, confirming the fit, materials, colors and workmanship.

Prepare Both Graphic References

For the Pullover Hoodie with Raised Tonal Chest Graphic and Truck Back Graphic (DB0027), send the raised chest artwork and truck design as separate files. Include their intended sizes, the hood-lining color and the preferred drawcord finish.