Black Regular Fit Crew Neck Sweatshirt with Ribbed Cuffs and Hem

Ningbo Haishu Dongbang Garment Co., Ltd. in China offers the Black Regular Fit Crew Neck Sweatshirt with Ribbed Cuffs and Hem with a regular torso and long set-in sleeves. Its plain black panels put the emphasis on a consistent fit and clean rib attachment.

Images illustrate the reference style. The specifications describe a proposed production version and can be adjusted during development.

Production Process

The Black Regular Fit Crew Neck Sweatshirt with Ribbed Cuffs and Hem starts with an approved fit reference, followed by fabric preparation, cutting, sewing and finishing. For a plain style, small differences in sleeve length or lower-band tension are easy to see because no graphic distracts from the outline.

The selected 80% cotton, 20% polyester brushed-back fleece at 320 GSM is dyed and relaxed before cutting. This is the same base fabric direction used for the oversized black sweatshirt in the range; the distinction here is the regular pattern.

Rib Edges Within a Regular Outline

The Black Regular Fit Crew Neck Sweatshirt with Ribbed Cuffs and Hem uses cotton-rich rib at the neck, cuffs and hem. The body has enough ease for everyday layering, but its shoulders and chest do not extend into a deliberately oversized outline.

The cuff holds the sleeve end near the wrist, and the hem band provides a defined lower edge. Their attachment is reviewed on the sample so the body neither flares out at the hem nor pulls in excessively.

 

A small print or embroidery can be developed on this sweatshirt if branding is needed. The plain version requires no additional decoration, and the same fit can be retained when a logo is added.

Suggested Development Specifications

Development Size Guide (cm)

Suggested garment measurements. Values labelled 1/2 arelaid-flat half widths, not full circumferences.

Body length: high shoulder point to hem, excluding neck trim. Sleeve length: shoulder seam to sleeve edge along the outer sleeve. Chest: laid-flat half width at underarm level; measure without stretching.

Factory Support for Repeat Orders

Dongbang’s approximately 10,000 m² factory brings pattern and sample development, cutting, sewing, finishing, inspection and packing into the production workflow. For this regular-fit style, the approved measurements and workmanship reference give those stages a consistent target.

First-piece approval and in-line checks help identify variation before the order is finished. Production timing is confirmed against the actual quantity, material readiness and schedule.

Our Certificates

FAQ

1. How does this differ from an oversized sweatshirt?

The torso is narrower and the shoulders stay closer to a regular position. The selected fabric direction is the same; the main difference is the pattern and fit.

2. Can it be supplied without any visible logo?

Yes. The base is plain on the front and back. Branding can be added only if the intended range calls for it.

3. Should a logo require a new fit?

Usually the approved fit can remain. Review the decoration method, location and local fabric support while retaining the agreed measurements unless a fit revision is requested.

4. How is the bulk production schedule confirmed?

Timing is confirmed for the order after the product details are reviewed and the pre-production sample is approved. Quantity, workmanship, fabric and trim readiness, and the production schedule all affect the delivery plan.

5. How is production quality controlled?

Checks cover incoming materials, first-piece approval, in-line workmanship and finished garments. Measurements are sampled across colors, sizes and batches. Defects are separated, repaired and re-inspected; any required product testing is agreed for the order.

Confirm the Regular Fit Reference

Send your size chart and black shade requirement for the Black Regular Fit Crew Neck Sweatshirt with Ribbed Cuffs and Hem (DB0034). If a logo is needed, provide its finished dimensions and position while retaining the agreed base fit.