Olive Long Sleeve T-Shirt with Distressed Neckline and Hem

Ningbo Haishu Dongbang Garment Co., Ltd. in China makes the Olive Long Sleeve T-Shirt with Distressed Neckline and Hem around a restrained worn finish. The olive surface stays plain through the chest and sleeves, bringing attention to small breaks along the neckline and lower edge.

Images illustrate the reference style. The specifications describe a proposed production version and can be adjusted during development.

Production Process

For the Olive Long Sleeve T-Shirt with Distressed Neckline and Hem, the distressed areas should be planned as part of the edge finish. The selected sequence starts with olive garment coloration and a soft wash, followed by controlled mechanical distressing after the shade is approved.

The nicks are kept small and separated. Stabilizing stitches behind the worked edges support the intended openings, with the allowable extent agreed on the sample. A distressed long sleeve t-shirt can lose its restrained appearance if the cuts spread too far or become too densely grouped.

A Plain Body with Open Sleeve Ends

The Olive Long Sleeve T-Shirt with Distressed Neckline and Hem uses 100% cotton single jersey at 180 GSM. This lighter fabric direction suits a relaxed layer beneath an overshirt or jacket. The long sleeves finish with open stitched ends, keeping the wrist line narrow without ribbed cuffs.

The straight body and unprinted back allow the edge wear to remain the defining detail. There is no front fastening or pocket to break up the olive ground.

Choosing How Much Edge Wear to Keep

A cleaner neckline or a more pronounced lower-hem effect can be developed separately. For this distressed long sleeve t-shirt, review the amount and distribution of wear, rather than specifying only a general distressed finish. A garment sample also shows how the neck opening lies after the edge treatment.

Suggested Development Specifications

Development Size Guide (cm)

Suggested garment measurements. Values labelled 1/2 arelaid-flat half widths, not full circumferences.

Body length: high shoulder point to hem, excluding neck trim. Sleeve length: shoulder seam to sleeve edge along the outer sleeve. Chest: laid-flat half width at underarm level; measure without stretching.

Care Guide

Washing

Wash the Olive Long Sleeve T-Shirt with Distressed Neckline and Hem according to the approved care label and avoid washing methods that may place excessive stress on the distressed neckline and hem. The garment should be handled carefully around the reinforced openings.

Drying

Avoid excessive mechanical force during drying, particularly around the distressed edges. Follow the confirmed care instructions for the final production fabric and garment finish.

Maintaining the Distressed Edges

The neckline and hem are intentionally distressed and should not be pulled or stretched unnecessarily. The stabilizing stitches help define the intended openings, while careful handling helps maintain the approved distressed appearance.

Inspection Points for Intentional Distressing

Distressing Position and Coverage

Check that the distressed marks remain concentrated around the neckline and lower hem. The chest, back and sleeves should stay plain. The number, spacing and maximum coverage of the distressed areas are confirmed against the approved sample rather than fixed to an unsupported measurement.

Edge Stability

Check the stabilizing stitches behind each distressed opening for secure attachment and inspect the surrounding fabric for uncontrolled tearing or excessive spreading. Any change to the approved distressing range should be reviewed during sample development.

Neckline and Hem Shape

After the distressing and finishing process, check the round neckline and lower hem for distortion. The relaxed straight body should remain within the approved measurements for each development size.

Size Measurement Check

For sizes S–XL, the development reference is 70–76 cm for body length, 62–65 cm for sleeve length and 53–62 cm for 1/2 chest, with each value checked against its corresponding size. Measurements are taken after the garment finishing process.

After-Sales Support

Dongbang keeps product specifications and production records available for order follow-up after shipment. For the Olive Long Sleeve T-Shirt with Distressed Neckline and Hem, feedback can be reviewed against the approved sample, including the olive shade, distressed position, opening range, stitching and finished measurements.

Issue Review

If a production issue is reported, Dongbang can review the relevant order details, product photos, inspection information and approved specifications to identify the affected workmanship or measurement point.

Correction and Follow-Up

When a confirmed issue requires further action, the production and quality teams review the cause and coordinate the applicable solution according to the order terms. Product feedback can also be recorded for subsequent production references.

Response Time

After-sales inquiries are generally responded to within 24 hours on business days. Technical or product-specific issues can be reviewed together with the relevant specifications and production records.

Our Certificates

FAQ

1. Are the distressed marks spread across the whole body?

No. The design concentrates small marks at the neckline and hem while leaving the main olive panels plain.

2. Can the edge wear be reduced?

Yes. Fewer or smaller marks can be developed without changing the basic silhouette. Their position and maximum extent should be agreed on the sample.

3. Does the top use sweatshirt cuffs?

No. It uses open long-sleeve ends with stitched hems. This keeps the outline closer to a long-sleeve T-shirt and makes it suitable for layered casual looks.

4. What is the MOQ for this style?

Our standard MOQ starts from 500 pieces per style. The final requirement depends on colors, sizes, fabric, trims and construction. Lower quantities may be possible for some products with adjusted pricing; color and size allocations are discussed for the order.

5. How is production quality controlled?

Checks cover incoming materials, first-piece approval, in-line workmanship and finished garments. Measurements are sampled across colors, sizes and batches. Defects are separated, repaired and re-inspected; any required product testing is agreed for the order.

Define the Distressed Edges

For the Olive Long Sleeve T-Shirt with Distressed Neckline and Hem (DB0019), mark the neck and hem areas you want to retain or simplify. Add your olive shade and fit requirements so the first sample can establish a clear workmanship reference.