Black Slim Fit Crew Neck T-Shirt with Long Sleeves

Ningbo Haishu Dongbang Garment Co., Ltd., a factory, develops the Black Slim Fit Crew Neck T-Shirt with Long Sleeves around a close torso and narrow sleeves. The short, straight body keeps the black layer compact beneath an open shirt or jacket.

Images illustrate the reference style. The specifications describe a proposed production version and can be adjusted during development.

Applications

The Black Slim Fit Crew Neck T-Shirt with Long Sleeves is a close-fitting layer for an open overshirt, relaxed jacket or cardigan. Its upper-hip length avoids a long lower panel, and the narrow sleeves fit beneath a fuller outer sleeve.

This crew neck long sleeve t-shirt also works alone when a simple fitted outline is wanted. The center-front seam adds a quiet vertical line without a graphic or fastening.

Stretch Jersey and Compact Edges

The Black Slim Fit Crew Neck T-Shirt with Long Sleeves uses 95% cotton, 5% elastane single jersey at 190 GSM. The stretch direction supports the close fit; it should be assessed through chest and arm movement on a garment sample.

The two front panels join along a narrow topstitched seam. A self-fabric neck band and coverstitched sleeve and body hems keep the edges small. The front seam is sewn without pulling the knit so it can lie flat down the body.

If more ease is wanted in this crew neck long sleeve t-shirt, review chest width and upper-arm width together. Keeping the original sleeve while widening only the body would change the close-fitting balance.

Suggested Development Specifications

Development Size Guide (cm)

Suggested garment measurements. Values labelled 1/2 arelaid-flat half widths, not full circumferences.

Body length: high shoulder point to hem, excluding neck trim. Sleeve length: shoulder seam to sleeve edge along the outer sleeve. Chest: laid-flat half width at underarm level; measure without stretching.

Revising a Close Fit from a Sample

Dongbang can develop from a physical garment or an existing size chart. The sample team can use comments on chest ease, upper-arm fit and layering length to revise the pattern before production.

A reference garment is particularly useful for this plain style because small differences in fit are more noticeable than any decorative detail. Materials or processes that cannot be matched exactly are reviewed during development.

Our Certificates

FAQ

1. Is the vertical front line a zipper?

No. It is developed as a narrow center-front seam with topstitching. The garment remains a pullover.

2. Does it have ribbed wrist cuffs?

No. The sleeves end in compact stitched hems, keeping the lower arm close and simple.

3. Can the body be lengthened for tucking in?

Yes. A longer body can be sampled while retaining the fitted chest and sleeves. Confirm the new hem position against the trousers or outer layers it is intended to accompany.

4. What is the MOQ for this style?

Our standard MOQ starts from 500 pieces per style. The final requirement depends on colors, sizes, fabric, trims and construction. Lower quantities may be possible for some products with adjusted pricing; color and size allocations are discussed for the order.

5. Can you develop the fit from a physical sample?

Yes. Send the reference garment for discussion with our pattern team. If its original fabric, accessories or processes are unavailable, the developed garment may differ; those changes are reviewed with you.

Share the Fit Reference

For the Black Slim Fit Crew Neck T-Shirt with Long Sleeves (DB0030), provide a reference garment or size chart showing chest ease, sleeve fit and body length. Mark whether the top is intended to finish above the hip or tuck in.