Outdoor Thermal Base Layer Set with Mottled Pattern and Contoured Leg Panels

Outdoor Thermal Base Layer Set with Mottled Pattern and Contoured Leg Panels by Ningbo Haishu Dongbang Garment Co., Ltd. in China provides two close-fitting pieces for an outdoor layering range. The crew neckline lies below an outer collar, while curved seams trace the legs through the pale mottled pattern.

Images illustrate the reference style. The specifications describe a proposed production version and can be adjusted during development.

Applications

The Outdoor Thermal Base Layer Set with Mottled Pattern and Contoured Leg Panels is intended as a first layer beneath roomier outdoor garments. A close torso, narrow wrists and tapered ankle openings reduce loose fabric at the points where layers meet.

The raglan sleeve line crosses toward the neck rather than ending at a conventional shoulder seam. Fit review should include reaching forward and bending at the hips and knees, with the intended outer clothing worn over the set.

Brushed Stretch Knit across Both Pieces

For the Outdoor Thermal Base Layer Set with Mottled Pattern and Contoured Leg Panels, the base is90% polyester, 10% elastane lightly brushed interlock at 210 GSM. The proposed brushed reverse gives the skin side a softer surface, while a stretch-compatible sublimation trial develops the cream and grey mottling.

The thermal direction remains a development target. Warmth requirements should be agreed for the intended combination of layers; no temperature rating or compression level is assigned to this set.

Balancing Length and Panel Position

The curved seams are part of the leg pattern, so their position should be reviewed at each size. Simply lengthening the ankle section could leave the knee shaping too high.

 

The top length and leggings rise need enough overlap during movement. The base proposes an enclosed elastic waistband; its width and tension are settled on the fit sample.

Suggested Development Specifications

Development Size Guide (cm)

Suggested garment measurements. Values labelled 1/2 arelaid-flat half widths, not full circumferences.

Top

Pants

Body length: high shoulder point to hem, excluding hood or collar. Chest: half width at underarm level, laid flat without stretching. Raglan sleeve length: side neck point to sleeve edge along the upper sleeve. 

Outseam: top waistband edge to hem, including waistband. Inseam: crotch junction to hem. Waist and hip: laid-flat half widths; hip measured at the widest seat level. Waist and leg opening measured relaxed, without stretching.

Coordinated Fit Development for Two Pieces

Dongbang has four pattern staff and six sample-room staff supporting development and revisions. A coordinated top and leggings sample lets the team review sleeve reach, torso overlap and knee-panel position together.

The same approved measurement reference can guide size grading and production inspection, while fabric and seam trials address stretch recovery and the chosen surface finish.

Our Certificates

FAQ

1. Does the set contain a removable jacket liner?

No. It consists of a long-sleeve top and a separate pair of leggings, designed to be worn as clothing layers.

2. Are the leggings specified as compression wear?

No compression level is specified. The base has a close fit; stretch and recovery are reviewed for movement and comfort.

3. What should be checked when changing the leggings length?

Review the rise, knee-panel position and ankle opening together. Length added only at the hem may place the curved shaping incorrectly.

4. How long does sample development take?

Usually 7–15 working days after design details, measurements and materials are confirmed. Revisions follow your comments. Minor changes are generally faster; major changes or new fabrics and trims can need additional time. Revised timing is confirmed after review.

5. Can the pattern and size range be customized?

Yes. We can create a pattern or modify an existing one from your tech pack, size chart, reference garment or design requirements. Measurements and fit are adjusted through sampling before bulk production.

Define the Layering Combination

For the Outdoor Thermal Base Layer Set with Mottled Pattern and Contoured Leg Panels (DB0058), send the intended outer garments, top and leggings measurements, and target warmth requirements. These guide the first coordinated fit sample.