Flared Waterproof Hardshell Cargo Pants with Thermal Fabric and Angled Zip Pockets

Ningbo Haishu Dongbang Garment Co., Ltd. in China offers Flared Waterproof Hardshell Cargo Pants with Thermal Fabric and Angled Zip Pockets with a lower leg that widens beneath shaped knees. Angled zip pockets follow a different line from the side flaps, bringing several storage details into the upper half of the pants.

Images illustrate the reference style. The specifications describe a proposed production version and can be adjusted during development.

Product Features

The Flared Waterproof Hardshell Cargo Pants with Thermal Fabric and Angled Zip Pockets place their main proportion change below the knee. The upper leg stays more defined, then opens into a broad hem. This keeps the outline distinct from a straight cargo leg even when both use similar pocket details.

The flare needs to begin at the right height for the intended size range. During fitting, check the knee bend, the point where the leg widens and the clearance above the chosen shoes.

Angled Storage above the Knee

The Flared Waterproof Hardshell Cargo Pants with Thermal Fabric and Angled Zip Pockets combine oblique thigh zips with side and rear flap pockets. Their placement should remain reachable without pulling the surrounding leg panels out of shape.

Gathering at the side waist allows the upper edge to change width, while belt loops provide another way to set the waist. The sample should be reviewed sitting as well as standing, with the pocket flaps lying flat.

A Lined Shell for Development

The base combines a200 GSM three-layer polyester/PU-membrane shell with a separate 100% polyester brushed lining at 120 GSM. The lining pattern follows the flare and needs enough length to avoid pulling the hem inward.

Waterproofing and thermal performance are targets for the selected materials and complete construction. Establish seam-treatment and zip details with an agreed testing plan. No padded fill or finished temperature rating is specified.

Reducing the flare is a fit option. It changes shoe coverage and the way the lining hangs, so both layers need to be revised together.

Suggested Development Specifications

Development Size Guide (cm)

Suggested garment measurements. Values labelled 1/2 arelaid-flat half widths, not full circumferences.

Outseam: top waistband edge to hem, including waistband. Inseam: crotch junction to hem. Waist and hip: laid-flat half widths; hip measured at the widest seat level. Waist and leg opening measured relaxed, without stretching.

Pattern Revisions with the Complete Leg in View

Dongbang’s pattern and sample teams can work from a size chart, physical reference or technical drawing. For a flared leg, a complete sample helps connect knee placement, pocket access and hem width in one review.

After delivery, reported fit or workmanship issues can be checked against the approved sample and production records. The team reviews the cause and responsibility before agreeing on corrective action.

Our Certificates

FAQ

1. Where should the flare begin?

At the position established by the knee shaping and intended silhouette. Review it on the fit sample in the actual size, rather than extending the lower leg without checking the knee.

2. Can the lining pull the wide hem inward?

It can if its shape or length is insufficient. The lining should follow the outer flare with suitable movement allowance and attachment points.

3. Can the angled pockets be made horizontal?

That is a development option. It changes the front layout and access angle, so the surrounding panel and pocket bag need a new sample review.

4. How long does sample development take?

Usually 7–15 working days after design details, measurements and materials are confirmed. Revisions follow your comments. Minor changes are generally faster; major changes or new fabrics and trims can need additional time. Revised timing is confirmed after review.

5. Will we approve a sample before bulk production?

Yes. The project may use development, fit, size-set and other samples as required. The pre-production sample must be approved before bulk production, confirming the fit, materials, colors and workmanship.

Set the Flare and Footwear Clearance

For the Flared Waterproof Hardshell Cargo Pants with Thermal Fabric and Angled Zip Pockets (DB0060), provide knee position, hem width and the intended shoe profile. Add the protection targets and pocket requirements before the lined sample is developed.