Black Breathable Quick-Dry Mesh Shorts with Large White Letter Graphic

Ningbo Haishu Dongbang Garment Co., Ltd. offers Black Breathable Quick-Dry Mesh Shorts with Large White Letter Graphic in China with large lettering breaking up the black mesh surface. The wide leg openings and short length keep the cut relaxed, while the side pockets remain separate from the main graphic area.

Images illustrate the reference style. The specifications describe a proposed production version and can be adjusted during development.

Fabric Comparison

The Black Breathable Quick-Dry Mesh Shorts with Large White Letter Graphic need the outer mesh and inner layer assessed together. The base uses 100% polyester open sports mesh at 180 GSM over 100% polyester tricot at 80 GSM.

Breathability and quick drying are development targets. Test the chosen mesh, lining and decoration together; an open-looking outer fabric alone does not establish the finished result.

Printing across an Open Surface

The Black Breathable Quick-Dry Mesh Shorts with Large White Letter Graphic carry large distressed letters on one leg. Their solid areas cover part of the mesh, so the selected screen-print route needs control over ink coverage, underbase and the hand of the printed panel.

Keep important letter edges clear of the pocket opening and hem fold. A smaller graphic is an option that exposes more of the mesh, but its distressed gaps must remain readable at the reduced size.

A Relaxed Leg above the Knee

The open hem leaves width around the thigh, and the side pocket position allows a hand to enter without crossing the graphic. The proposed waist uses covered elastic and an internal drawcord; the source top covers this part of the reference.

Suggested Development Specifications

Development Size Guide (cm)

Suggested garment measurements. Values labelled 1/2 arelaid-flat half widths, not full circumferences.

Outseam: top waistband edge to hem, including waistband. Inseam: crotch junction to hem. Waist and hip: laid-flat half widths; hip measured at the widest seat level. Waist and leg opening measured relaxed, without stretching.

Decoration Trials on the Actual Mesh

Dongbang can recommend a print route from the artwork and chosen fabric, with specialist processes coordinated through partner suppliers when needed. A trial on the actual mesh lets the team review the white coverage and distressed gaps before garment assembly.

Sampling can then combine that panel with the lining and pocket construction. Order-specific performance tests can be arranged against the agreed requirements.

FAQ

1. Why does the lining affect the fabric decision?

It sits behind the mesh openings and contributes to coverage, airflow and drying behavior. Review the complete combination rather than judging the outer layer by itself.

2. Can the large white lettering be made smaller?

Yes. Check the distressed gaps and narrow strokes at the new size, along with clearance from the pocket and hem.

3. Does the reference show the elastic waistband?

The upper section is covered by the styled top. Covered elastic and an internal drawcord are proposed details for the sample.

4. How is the bulk production schedule confirmed?

Timing is confirmed for the order after the product details are reviewed and the pre-production sample is approved. Quantity, workmanship, fabric and trim readiness, and the production schedule all affect the delivery plan.

5. How is the decoration method selected?

We recommend printing or embroidery to suit the artwork, fabric, quantity and intended effect. Send the design, placement, dimensions and colors. Suitable methods are reviewed before sampling, rather than applying every process to the same fabric.

Send the Graphic at Finished Size

For the Black Breathable Quick-Dry Mesh Shorts with Large White Letter Graphic (DB0064), supply the lettering file, print dimensions and mesh reference. Confirm coverage and performance targets for the combined outer, lining and decoration.